This is the more expensive of the 2 ways you can power a model 600 tubing bender.
Currently lead time is Approx. 2-3 weeks. Due to the heavy increase in orders lead times have been extended for the time being.
This electric/hydraulic system was fully engineered to work with our bender. It features a 2 H.P. industrial induction motor, robust pump and steel reservoir, and a custom ram. This is the most affordable high performance automatic electric hydraulic power system on the market. We make these systems right here in the US with 99% of the components being sourced from North America and Europe. This is not an off-the shelf imported power unit.
*Double acting (power extend and retract)
*~11.5 second cycle to 95 degrees
*Infinitely variable hydraulic flow for speed control
*optional adjustable rotation stop for precise bends and repeat parts!
*Electrical Install Kit- Comes with all necessary components to get the system running from the 220/240 VAC NEMA 10-50 wall plug all the way to the limit switches on the hydraulic valve. Includes motor relay, toggle switch, junction box, machine-tool-quality wiring, 240v/12v power supply for the safe 12v control circuit, etc. Power cord is 6 feet long. Longer cord available for additional charge if you don’t use equipment grade extension cords in your shop.
*Electrical/Cart Install Kit- Comes with the same parts in the electrical kit, and adds powder coated cart risers and brackets with all necessary hardware to mount on one of our bender carts (this puts the motor/pump/reservioir under the lower shelf on our carts),
*Precision Auto-Stop Kit- This infinitely adjustable auto-stop turns off the hydraulics when the machine reaches the pre-set stop point. Say goodbye to part variation, this will stop in the same place every time. All metal parts come nickel plated. Requires drilling 8 small holes to install. All wiring and plugs included.
Notes- This cylinder doesn’t fit in the machine with the Thin Wall Attachment (TWA). We may be able to machine the end to work with one if needed. Let us know please. The auto stop absolutely cannot be used with the TWA. This cylinder/pump combo is also biased more toward speed that brute force, a thusly will not bend 2.0 x .250 wall. If you need to bend an exact material that is stout, we recommend you order our material test bend service to determine feasibility on your exact material from your supply chain.