Tube Size: 1.0″ Square, 1.25″ Square, 1.50″ square. 1.50″ Square includes 2 clamp blocks for break in period.
Center Line Radius (CLR): 4.5″, 4.5″, 6.00″
Min/max wall thickness: For a complete range of wall thickness this tubing bender can bend for any material, go check out our Wall Thickness Chart (LINK) and you will find the range of wall thickness that it can bend for stainless, carbon steel, and aluminum.
Save over $75 by buying all 3 square dies at once!
Notes about square die break in- We redesigned our square dies in 2021 and achieved increased bend quality. This also increased the force the die puts on the outer walls of the tube while bending. Due to this added force, the die and tube need to be lubricated with bend-all-004 (sold in our store), and you will also need to make your first several bends with 2 clamp blocks (one like normal, second on as a back up to add holding force). Once your bend is done, you can use an extra pin and the electric/hydraulic system in reverse to eject the bends or you can use a rubber mallet to tap them out. Even on 1.50x.125 wall A500 steel square tube with a brand new die and 90 degree bends we’re able to remove the material easily this way. After you dies break in and wear a little they should operate just like a round tube die that has a couple of break-in bends on it (material will come out easily by hand. We hope this helps and prevents any surprises. -RogueFab Team