503-389-5413 [email protected]

Tubing Bender m600 HD kit

$69.00

Categories: ,

Description

This adapts your tubing bender so that the pins will be supported well enough to bend 1.75x.250 DOM tube! or solid HR round bar! Great for other heavy wall and high strength materials too. This is ONLY for air/hydraulic applications. It is not compatible and completely unnecessary on our electric/hydraulic powered machines.

IMPORTANT! – The photo shows an additional pressure die which is required for HD applications, you must order them separately. One for each tube size that you want HD capacity in. See “ordering example” tab for more detail on how to order. You can use any 2 pressure dies you want for HD bending, 2 rollers, 2 standard pressure dies, one of each, etc.. For a complete range of wall thicknesses that require an HD kit, please visit our Wall Thickness Chart (LINK).

Why would I want this: You must use this on ANY material that is said to require it in our master wall thickness capacity chart. If you do not, you will bend at least 1 pin in the machine, and be responsible for the damage. This also makes the ram 1.25″ longer, increasing machine travel by several degrees (which you may want).

Why wouldn’t I want this: If you are only bending .120 wall DOM tube and are happy with your ram travel length, this will not make the machine work any better or last longer. If you are buying the M600 xHD it already comes with this.

Note: This must be temporarily removed from your machine while using a Thin Wall Attachment (TWA) if equipped.

Ordering Example

Still lost? We’re so sorry. Follow this example, it will make more sense, we promise!

Let’s say you want to bend 1.25 x .250, 1.50 x .250, and 1.75x.250. You already have a bender and ONLY a 1 inch die set, and want to add 1.25, 1.5, and 1.75. You are smart, so you go check out the master bending thickness chart. You see that on the line for 1.25, the standard M600 can bend up to .250 with no HD kit. You also see that the 1.50 line goes up to .250 in the m600 HD column. the 1.75 line is the same, .250 is listed in the m600 HD column. So you need HD kits for both the 1.50 and 1.75, but not the 1.25.

So you add the “HD kit” to your cart (this item right here, $65). You also go back to the dies page and order an additional 1.50 and 1.75 pressure dies for $15 each. You don’t need an additional pressure die for 1.25 because it doesn’t require an HD kit in this example, as the wall thickness chart indicated. You of course also go get the actual die sets for all 3 sizes.

If it’s still not clear, e mail us and ask us for help.

5
Rated 5 out of 5
0 %
0
4
Rated 4 out of 5
0 %
0
3
Rated 3 out of 5
0 %
0
2
Rated 2 out of 5
0 %
0
1
Rated 1 out of 5
0 %
0
With images(0)Verified(0)All stars(0)

Reviews

There are no reviews yet.

Be the first to review “Tubing Bender m600 HD kit”

Your email address will not be published. Required fields are marked *

Related products