facebook
Sale!

VersaNotcher – Universal Tubing Notcher – PRO KIT

(17 customer reviews)

$549.00$699.00

The original high performance tube pipe notcher that can safely clamp on bends, notch on bends, adjust over 225 degrees, and even notch square tubing , flat bar, and C channel!

Clear
SKU: 2124 Category:

Description

The VersaNotcher is a PATENT PENDING tubing notcher and pipe notching machine can make cuts and holes at angles up to 225 degrees. There are quick-release cam locks for fast precision adjustment. No assembly is required. This tube notcher mounts easily in a bench vise.

Save $28-41 by ordering the PRO KIT – comes with the VersaNotcher, (6) 5/8″ arbors, (2) 1/2″ arbors, (2) 1.5″ hole saws, (3) 1.75″ hole saws, and a bottle of cutting fluid!

Chose between regular 1.5″ cutting depth hole saws, or the same exact package/tool upgraded to our super deep 3″ hole saws (huge time saver!).

VersaNotcher Specs:

  • Round Tube Capacity: 3/4″ to 2″
  • Square Tube Capacity: 3/4″ to 1 1/2″ (2″ when notching diagonal)
  • Flat bar Capacity: 1″ to 2 1/2″ wide
  • Angle adjustment range: 225 degrees
  • Max offset: 1 7/16″
  • Max Hole Saw Diameter: 4″
  • Notch on a bend: YES
  • Clamp on a bend: YES
  • Clamp square tube in “diamond” orientation: Yes

Features:

  • Angle adjustments: Quick release cam locks for fast precision adjustment.
  • Pivots: Oil-Lite impregnated bronze bushings with case hardened and polished axles.
  • Angle indication: milled into the frame for durability. 2.5 degree hash marks, numbers every 5 degrees.
  • Offset indication: milled into the frame for durability. 1/8″ Increments.
  • Shaft: 1″ OD 416 polished and ground heat treated stainless steel on dual hardened bearings.
  • Vise interface: One hand lockable quick release handle mounted to an ergonomic hand grip wheel.
  • Vise type: True ACME lead screw with bronze thrust washer for long life and reduced friction.
  • Finish: Plain steel frame
  • Assembly required: None.
  • Hole saws: accepts standard hole saws on standard arbors (RogueFab arbor included!).
  • Power: Use any 3/8 or 1/2″ hand drill.
  • Mounting: mounts easily in a bench vise.
  • MADE IN THE USA!

Similar Product Warning – Another company makes a notcher extremely similar to the VarsaNotcher (identical bearing block design and adjustment, vise jaw shape and orientation identical, etc). This product was partially reverse engineered from a VersaNotcher purchased from us. We discourage this kind of “copy design” process, as it isn’t good for either company, but it is up to you (the customer) who you want to patronize. Thank you.

Info/Videos

Check out all the features! Don’t for get to subscribe to us on YouTube to see more videos.

17 reviews for VersaNotcher – Universal Tubing Notcher – PRO KIT

    Dominick Faraci
    01/23/2021
    Great notcher can do just about every angle and clamp on a bend is super nice. But for the bad. The locking arms that hold the angle are not the best. The plastic and arch of them don’t hold hard when fully closed. I have also had problems with the clamping part that holds the tube sometimes it gets jammed up and you have to take the whole thing apart to get the tube out. It’s also a pain in the donkey to change out to a different size hole saw adjusting the arbor to perfectly true takes forever I would prefer a three jaw chuck or something better than 6 set screws. Can it do just about everything yes. Does it have some flaws absolutely but for the price point there is nothing better.
Add a review

Your email address will not be published. Required fields are marked *

You may also like…