1.75″ Round Tube Die Bundle (7/8 Pin)

From: $265.00
(9 customer reviews)
Some of our benders use a 3/4 pin through the main die, while others use a 7/8 pin. You can easily measure this with calipers. All machines sold 2023 and later will use the 7/8″ pins. For a complete range of wall thickness this die can bend, please visit our Wall Thickness Chart (LINK) and you will find the capacity for stainless, carbon steel (1020/4130/etc), and aluminum. All of our dies carry a lifetime warranty against breakage and can bend 195 degrees. Standard Pressure dies cannot be used with aluminum Pressure Roller Die upgrade- Speeds up loading the machine and also reduces friction on the dies, making lubrication unnecessary and also potentially improving bend quality slightly. They are great for STEEL, ALUMINUM, and STAINLESS. They also allow you to pull bends up to 20+ degrees through them to make “S” bends and bends very close together if you’re careful. UHMW Pressure die- Ultra High Molecular Weight plastic pressure die, these are great for protecting the finish on high polished aluminum or stainless steel
Category:

  • Weight:

    14 lbs

  • Dimensions:

    11 × 11 × 2 in

BUILD IT YOUR WAY

Customize The Options To Get The Perfect Tool For Your Needs

Die Options

Die Options

7/8" (all 2023+ machines)
Blocks 2

How many clamp blocks do you want?

How many clamp blocks do you want?

Two clamps are recommended for co-planar bends
...

Pressure Die Cover

Choose pressure die type

Choose pressure die type

Two pressure dies are required for HD applications or mandrel bending with a 6" CLR
...

.436 1.50,40mm

M600 Bolt-On Die Spacers

M600 Bolt-On Die Spacers

.311 (dies: 1 3/4", pipe combo)

Choose your options

Description

Some of our benders use a 3/4 pin through the main die, while others use a 7/8 pin. You can easily measure this with calipers. All machines sold 2023 and later will use the 7/8″ pins.

For a complete range of wall thickness this die can bend, please visit our Wall Thickness Chart (LINK) and you will find the capacity for stainless, carbon steel (1020/4130/etc), and aluminum. All of our dies carry a lifetime warranty against breakage and can bend 195 degrees.

Pressure Roller Die upgrade- Speeds up loading the machine and also reduces friction on the dies, making lubrication unnecessary and also potentially improving bend quality slightly. They are great for STEEL, ALUMINUM, and STAINLESS. They also allow you to pull bends up to 20+ degrees through them to make “S” bends and bends very close together if you’re careful. Not available for all sizes.

NOTE: When you order a die from Rogue Fabrication, it comes with a clamp block and a pressure die. You can buy additional pressure dies (for capacity to match your 605 or 625 bender) or additional clamp blocks (for several reasons, see clamp block listing for details) separately if you want more. Also, dies 1.50″ OD and under that are on a 6.0″ centerline bending radius will be limited on travel by a few degrees per stroke due to space limitations. No other dies are affected.

9 reviews for 1.75″ Round Tube Die Bundle (7/8 Pin)

    Richard Palander
    07/31/2023
    Almost have a full set for nominal sizes. I’ve bent tons of hand rail on site, some roll cages and brush guards with these. Lately it’s been some small tube work for custom furniture. Running the heavy duty bender, great unit to have in the shop.
    Grant Holcombe
    03/07/2023
    Good selection and all 180+ deg capable, normally get new dies to me in under a week. Can't be beat.
    bo51087
    01/28/2022
    Great Die selection they are always in stock with fast shipping! Great customer service.
    DirtySallyFab
    01/31/2021
    These things are tough! Even with me screwing up- slipping clamp blocks, forgetting to wipe and lube, they hold up really well. You definitely want to use the bolt on spacers. Makes changing much easier.
    Travis Quiller
    01/22/2021
    Great dies and the 180* on one die without a die reset is awesome. The new roller die compared to the old block makes all the bends much cleaner and smooth coming out of the bender.
    Zac Beagan
    09/26/2020
    I'm in Canada, so shipping is usually a hassle, not so dealing with Rogue. I ordered the 1.75 die set on a Sunday, had a call from Rogue Monday to confirm the address, and had the die by Thursday. The quality is great, and more importantly, the customer service is excellent too.
    Steven Stafford
    09/05/2020
    These dies are very well made and durable!! They give me great bends and are worth every penny!!
    Steven Stafford
    09/05/2020
    These Dies are very well made and durable!! They give me great bends and are well worth every dollar!
    Moon
    06/16/2020
    The 1.75 die I'm using has been great! Bends have been well-formed, and easy to execute. No problems at all!
Add a review

Your email address will not be published. Required fields are marked *

PRODUCTS YOU MAY ALSO LIKE...

  • 1.0″ Round Tube Die Bundle (7/8 Pin)

    From: $197.00
    Select options

  • 40MM Round Tube Die Bundle (7/8 Pin)

    From: $347.00
    Add to cart

  • 1.125″ Round Tube Die Bundle (7/8 Pin)

    From: $197.00
    Select options