HD kit for m600/601 tube bender

(4 customer reviews)


Customize The Options To Get The Perfect Tool For Your Needs

HD Sleeve For Rogue Fab/Harbor Freight Ram

HD Sleeve For Rogue Fab/Harbor Freight Ram


HD Sleeve For Northern Tools Ram

HD Sleeve For Northern Tools Ram


5/8" x 5.5" Pin

5/8" x 5.5" Pin


HD Spring

HD Spring



*If you own a RogueFab M600HD, M600XHD, M605 or M625 YOU ALREADY HAVE THIS! This kit is to convert a Standard m600 or m605 to a M600HD or M605*

Compatibility: This works on the Harbor Freight air/hydraulic cylinder PN 56215, and also on the Northern Tool Cylinder #46200. Choose the correct application please.

This adapts your tubing bender so that the pins will be supported well enough to bend 1.75x.250 DOM tube! or solid HR round bar! Great for other heavy wall and high strength materials too. This is ONLY for air/hydraulic applications. It is not compatible and completely unnecessary on our electric/hydraulic powered machines. It also has the benefit of making your machine bend 94 degrees in one ram cycle so you can bend a 90 and spring back in many cases without re-pinning the ram. Without this kit the machine only bends to 88 degrees gross.

IMPORTANT! – An additional pressure die is required for HD applications, and you must order them separately. One for each tube size that you want HD capacity in. See “ordering example” tab for more detail on how to order. You can use any 2 pressure dies you want for HD bending, 2 rollers, 2 standard pressure dies, one of each, etc.. For a complete range of wall thicknesses that require an HD kit, please visit our Wall Thickness Chart (LINK).

Why would I want this: You must use this on ANY material that is said to require it in our master wall thickness capacity chart. If you do not, you will bend at least 1 pin in the machine, and be responsible for the damage. This also makes the ram 1.25″ longer, increasing machine travel by several degrees (which you may want).

Why wouldn’t I want this: If you are only bending .120 wall DOM tube and are happy with your ram travel length, this will not make the machine work any better or last longer. If you are buying the M605 or M625 it already comes with this.

Note: This must be temporarily removed from your machine while using a Thin Wall Attachment (TWA) if equipped (the TWA is discontinued). This also works on the old HF ram, PN 94562.

4 reviews for HD kit for m600/601 tube bender

    Img 6593
    Purchased this to remedy an issue i had with using a smaller shaft hydraulic ram. this not only tightened up the bender, allows me to bend a 90 in one stroke, but also allowed me to use the "W" spring bracket since it wouldn't clamp to my thinner ram shaft.
    Eb79553f 5330 4aee B9c6 5345cf73955e
    034cc870 7db6 4bf5 9576 310aa4513cdc
    Eb79553f 5330 4aee B9c6 5345cf73955e
    Got this mainly to be able to bend 90° With one ram stroke. Works great. Definitely a good upgrade looks and functions great!
    Ryan Allison
    This really helps tighten up the regular model and makes it perform better. Definitely need to buy this.
    Brendan Rudack
    I believe I have the new improved version of this as it is a machining vs weldment (as pictured). I primarily got this for one reason, the increased ram travel to be able to bend 90 degrees in one motion. I was successfully able to do this on 1.75" x 0.095" wall DOM tubing which is awesome. The part is very well made, fits the Northern Tool 46200 hydraulic Ram and supports the full pin width as advertised to prevent deforming the pin while bending heaver wall thickness materials.
Add a review

Your email address will not be published. Required fields are marked *