facebook

Forum

Notifications
Clear all

63’ Chevy II  


J C
 J C
(@jc409)
Fabricator Customer
Joined: 10 months ago
Posts: 26
Topic starter  

We took in a stock Chevy II project. It rolled in stock and rolled out with arm front end, 4-link rear suspension, and a 8.50 sportsman cage.

Here’s a shameless plug for Joe. 

5E4D5B35 04FD 43EA 8A1C 437A91A7CAA0
37AC2678 283F 4FC0 9E65 1120CD21AC05
F35FD385 DADF 43D1 9C09 0DBBA7C84212
 35933A1F 6E1E 405E 82F0 6CEF6A6ADC7F

Quote
J C
 J C
(@jc409)
Fabricator Customer
Joined: 10 months ago
Posts: 26
Topic starter  

Picture of the front end

 9A89974F 0D47 4972 B93A 7FAD294D5F6C

ReplyQuote
Joe Gambino
(@joe)
Moderator Admin
Joined: 6 years ago
Posts: 95
 

Beautiful! Welds look clean. I like where you continued the square tube back half into the cage with a piece of round tube. Makes the switch look more integrated 🙂

Is this a mild steel build? 1 5/8 .120? Or did you use some .083 Docol or 4130?

-The dude who started RogueFab
4Runner Build thread: https://www.roguefab.com/forum/projects-and-builds/rogue-fabrication-4runner/


ReplyQuote
J C
 J C
(@jc409)
Fabricator Customer
Joined: 10 months ago
Posts: 26
Topic starter  

413o 1-5 removed link It seems as a trend has developed that everyone has become weight conscious. I haven’t done a mild steel cage in quite awhile. 


ReplyQuote
J C
 J C
(@jc409)
Fabricator Customer
Joined: 10 months ago
Posts: 26
Topic starter  

4130 1-5/8  for the previous post.  


ReplyQuote
Ambroze
(@phanboifabrication)
Member Verified Contributor
Joined: 2 years ago
Posts: 33
 

very nice! looks damn good. @jc409 wheres your shop located out of?


ReplyQuote
J C
 J C
(@jc409)
Fabricator Customer
Joined: 10 months ago
Posts: 26
Topic starter  

@phanboifabrication

illinois 


ReplyQuote
Josh Gullatt
(@joshgullatt)
Member Admin
Joined: 12 months ago
Posts: 15
 

@jc409 that is a sweet car! Looks like it is going to be a monster - Josh in sales


ReplyQuote
Share: