facebook

Forum

Notifications
Clear all

Evo 8 Build  


(@phoenixfabrication)
Member Verified Contributor
Joined: 12 months ago
Posts: 7
Topic starter  

This is my current project. I'm taking my time with it and learning as I go. Doing everything myself including tube front end, fuel cell, wiring, etc. (Eventually) This is my 2003 Evo 8 with the goal of drag racing it. Currently using DOM tube (price vs others) and Bend-Tech software along with the RogueFab M600 & Versa Notcher. The goal is to build a tube front end and have the information saved in bend-tech, then re-do it with Chromoly or similar. Ignore the mess and bottle just sitting there. I was moving stuff around during Thanksgiving! Any tips or recommendations please give them!


 

This topic was modified 1 month ago by Blake Swing

Quote
Joe Gambino
(@joe)
Moderator Admin
Joined: 5 years ago
Posts: 62
 

You're off to a great start! Will this be an "all-turbo" build? Or will you be running nitrous? E85, race gas, or pump gas? 

 

Sorry for all the questions!

-The dude who started RogueFab
4Runner Build thread: https://www.roguefab.com/forum/projects-and-builds/rogue-fabrication-4runner/


ReplyQuote
(@phoenixfabrication)
Member Verified Contributor
Joined: 12 months ago
Posts: 7
Topic starter  

@joe

 

It is going to be E85. That is the current goal. 


ReplyQuote
Joe Gambino
(@joe)
Moderator Admin
Joined: 5 years ago
Posts: 62
 

😎 cool

-The dude who started RogueFab
4Runner Build thread: https://www.roguefab.com/forum/projects-and-builds/rogue-fabrication-4runner/


ReplyQuote
(@linfield-fabrication)
Tinkerer Customer
Joined: 2 months ago
Posts: 14
 

Wow, that’s an ambitious project.  I can’t wait to see how it progresses.

Jamie

Linfield Fabrication


ReplyQuote
(@phoenixfabrication)
Member Verified Contributor
Joined: 12 months ago
Posts: 7
Topic starter  

Here are some updated pics. Block has no internals, but decided to put it together and then put trans on so that I could get some work done and start mocking things up. A bunch of clamps

1612116223-engine_in.jpg
1612116251-mockup1.jpg
1612116278-Mockup2.jpg
1612116341-Mockup3.jpg
This post was modified 3 weeks ago 3 times by Blake Swing

ReplyQuote
Share: